The modification brings Nvidia DLSS 5 to AMD RX 9000 series GPUs. Early tests on the RX 9070 XT produce 30 frames per second at 1080p. That result undercuts the stable frame rates the same card delivered before the change.
The news
A modder has made Nvidia DLSS 5 function on AMD RDNA 4 graphics hardware. The change applies to RX 9000 series cards and is available for immediate testing on compatible systems. Early results on the RX 9070 XT show 30 frames per second at 1080p, well below prior stable performance levels on the same hardware.
RDNA 4 cards previously relied on AMD's own upscaling and frame-generation tools. DLSS 5 remained restricted to Nvidia GPUs because of its integration with Nvidia hardware features. The new modification removes that restriction for users willing to install community code. Owners of RX 9000 series GPUs can now apply the same DLSS 5 pipeline that Nvidia cards use, though the current implementation carries a clear performance cost.
Details
The mod targets the RX 9070 XT in particular. At 1080p the card delivers 30 frames per second under DLSS 5, a figure the source describes as destructive to previously stable frame rates. The stated development goal is performance parity with an Nvidia RTX 5070 Ti. No other RX 9000 models receive specific numbers in the report, yet the modification is presented as usable across the full RX 9000 line. The change requires users to accept the early-stage limitations while further optimization work continues.
The source notes that the port works right now for anyone with an RX 9000 series GPU. It also states that the current results destroy the stable performance users had obtained before applying the mod. Development continues with the explicit target of matching RTX 5070 Ti output. Until that level is reached, the mod trades smoothness for access to the newer upscaling method.
Why it matters
For owners of AMD hardware the modification offers a direct route to Nvidia's latest upscaling technology without swapping cards. The 30-frame-per-second result at 1080p shows the port is functional but not yet practical for most workloads. Reaching RTX 5070 Ti levels would narrow the feature gap between the two vendors and give AMD buyers access to the same image-quality tools Nvidia promotes. Until that target is met, the mod remains an experiment that trades current smoothness for future potential. Continued progress will determine whether the effort stays a niche project or becomes a standard option for RDNA 4 users.
The single reported data point already illustrates the trade-off. A card that previously maintained higher frame rates now sits at 30 frames per second once DLSS 5 is forced onto it. That gap makes clear why the stated goal of 5070 Ti parity matters to anyone running RDNA 4 hardware. If the optimization work succeeds, the mod could remove one practical difference between AMD and Nvidia feature sets. If it stalls, the change stays limited to users who accept lower frame rates in exchange for the newer upscaling pipeline.
The source provides no additional benchmarks or model-specific results beyond the RX 9070 XT at 1080p. It also supplies no timeline for further updates. Those absences leave the long-term value of the mod dependent on work that has not yet been shown. For now the available evidence is limited to one performance figure and one stated target.
---
Sources:
{
"word_count": 612,
"sources_used": 1,
"headline": "Modder Ports Nvidia DLSS 5 to AMD RDNA 4 GPUs"
}
No comments yet